Sleek and relaxed, this hoodie adapts easily to any body type. While simple in design, the exposed stitching at the collar, shoulders, armholes, cuffs, and hem gives it a deconstructed finish—like raw seams left intentionally undone. A laid-back piece with subtle edge.
Print area
Front Side / Back Side / Left Sleeve / Right Sleeve / Neck Label
Process support
DTG print / DTF transfer / Heat transfer vinyl
Sizes
SMLXL2XL
Colors
Dark BrownHeather GrayPurpleBlackWhiteOatmeal Heather
Minimalist, smooth lines and a zip-up hood design, this solid-colored hoodie is perfect for various print customization needs. The handcrafted stitching highlights its premium quality, while the kangaroo pocket adds a casual, laid-back touch. This versatile, solid-colored hoodie is the perfect foundation for creating bestselling autumn and winter products.
Features
Full-Zip Hooded Design
Drop shoulders
Loose fit
Kangaroo pockets
Fabric
Cotton (81%)
Fabric weight: 440g/m²
Pre-shrunk
Styles
Loose drop-shoulder fit
Suitable for all body types
Simple and inclusive lines
Care instructions
Hand washIron, medium temperatureDo not dry cleanDo not bleachLine dry
Size Guide
This size guide shows product measurements taken when products are laid flat. Actual product measurements may vary by up to 1" (2.5cm).
A) Chest circumference
Find the two underarm points of the clothes. Start from one underarm point with a soft ruler and reach the other underarm point from left to right. The soft ruler should be kept horizontal and close to the clothes to avoid distortion or inclination.
B) Shoulder width
Start from the top of one sleeve with a soft ruler, pull it horizontally across the back of the clothes and reach the top of the other sleeve. The soft ruler should be kept horizontal and close to the clothes to avoid distortion or inclination.
C) Clothing length
Start from the edge of the neckline, go down along the front center line of the clothes, and pull with a soft ruler to the edge of the clothes hem. The soft ruler should be close to the clothes.
D) Sleeve length
Find the top of the seam where the sleeve and the garment body are joined as the starting position. Starting from this starting position, along the outer center line of the sleeve, pull with a soft ruler to the cuff edge.
Imperial (in)
S
M
L
XL
2XL
Chest
25.2
25.98
26.77
27.56
28.35
length
26.77
27.56
28.35
29.13
29.92
Shoulder
22.83
23.62
24.41
25.2
25.98
Sleeve length
23.62
24.02
24.41
24.8
25.2
Metric (cm)
S
M
L
XL
2XL
Chest
64
66
68
70
72
length
68
70
72
74
76
Shoulder
58
60
62
64
66
Sleeve length
60
61
62
63
64
Print guide
1. Upload files in JPG and PNG formats with at least 150 dpiFor the best printing performance, make sure you upload images with at least 150 dpi. We recommend using PNG and SVG,because PNG's background is transparent, SVG's size is small and can be scaled without changing the quality of the image.
2. Make your design with the sRGB color profileThe color might be effected when converted to CMYK color profile which is used for printing. For the best accuracy, we suggest that you convert the print file to sRGB color profile in your design software.
3. Design and refer to the recommend size for each canvasWe now don't support the product templates for designing on your side. Make sure that print files have at least 150 dpi after eidting.
1. Safe print & Stitching areaSafe print area Keep all your designs are in the safe print area, in case your designs will be lost during production. Stitching areaThis area will be stitched during production. Please make sure your designs are not in this place.
2. Get all print area covered
3. Use full-bleed imagesAny space that isn't covered by designs will show the bare fabric, which may destroy the design.
4. Don't try to match designs across adjacent canvasEven though you match designs across adjacent canvas perfectly on mockup or our 3D model, it's not possible to achieve the perfect design on the finished product.
5. Logo Safety AreaIt refers to an area to keep your logo which will be printed complete on the apparels, especially some neck labels which are near the stitching area.Click 'Gridlines' button and see some little squares, keep your logo at least one square height away from the black line, then, your logo is in the safety area.
Features
Fabric
Styles
