CatalogunisexPants345GSM Fleece-Lined Minimalist Jogger Pants

345GSM Fleece-Lined Minimalist Jogger Pants

Crafted from a 345gsm fleece-lined fabric (42% cotton, 53% polyester, 5% other fibers), these minimalist jogger pants deliver fast heat retention, stable warmth, and strong durability. The relaxed, structured fit and clean contour lines offer wide customer adaptability, while metal-tipped drawcords enhance the premium streetwear look. High-density material ensures a refined appearance with dependable long-term wear.

Print area

Process support

Sizes

SMLXL2XL

Colors

BlackKhakiDark GreyMisty BlueTaupeSage GreenMedium GreenLight GreySmoky PurpleMatcha GreenCream ApricotWhiteTurquoiseMarled GreyMedium GreyTanPurpleDark BrownEmerald GreenMisty PurpleRust RedApricot GreyRose PinkGrey BlueDusty PinkMedium BlueTurquoisebaby pink
12.991-1912.3420-4911.6950+
Start Designing
Estimated delivery turnaround 7–12 days
FeaturesCare instructionsSize GuidePrint Guide
Features
Fabric
Styles

Care instructions

Hand washDo not bleachDo not dry cleanLine dryIron, medium temperatureDo not iron

Size Guide

This size guide shows product measurements taken when products are laid flat. Actual product measurements may vary by up to 1" (2.5cm).

A) Chest circumference

Find the two underarm points of the clothes. Start from one underarm point with a soft ruler and reach the other underarm point from left to right. The soft ruler should be kept horizontal and close to the clothes to avoid distortion or inclination.

B) Shoulder width

Start from the top of one sleeve with a soft ruler, pull it horizontally across the back of the clothes and reach the top of the other sleeve. The soft ruler should be kept horizontal and close to the clothes to avoid distortion or inclination.

C) Clothing length

Start from the edge of the neckline, go down along the front center line of the clothes, and pull with a soft ruler to the edge of the clothes hem. The soft ruler should be close to the clothes.

D) Sleeve length

Find the top of the seam where the sleeve and the garment body are joined as the starting position. Starting from this starting position, along the outer center line of the sleeve, pull with a soft ruler to the cuff edge.

Imperial (in)SMLXL2XL
Length38.9839.7640.5541.3442.13
Hip Width22.0522.8323.6224.4125.2
Waistline13.3914.1714.9615.7516.54
Foot Opening4.334.534.724.925.12
Metric (cm)SMLXL2XL
Length99101103105107
Hip Width5658606264
Waistline3436384042
Foot Opening1111.51212.513

Print guide

1. Upload files in JPG and PNG formats with at least 150 dpiFor the best printing performance, make sure you upload images with at least 150 dpi. We recommend using PNG and SVG,because PNG's background is transparent, SVG's size is small and can be scaled without changing the quality of the image.

2. Make your design with the sRGB color profileThe color might be effected when converted to CMYK color profile which is used for printing. For the best accuracy, we suggest that you convert the print file to sRGB color profile in your design software.

3. Design and refer to the recommend size for each canvasWe now don't support the product templates for designing on your side. Make sure that print files have at least 150 dpi after eidting.

1. Safe print & Stitching areaSafe print area Keep all your designs are in the safe print area, in case your designs will be lost during production. Stitching areaThis area will be stitched during production. Please make sure your designs are not in this place.

2. Get all print area covered

3. Use full-bleed imagesAny space that isn't covered by designs will show the bare fabric, which may destroy the design.

4. Don't try to match designs across adjacent canvasEven though you match designs across adjacent canvas perfectly on mockup or our 3D model, it's not possible to achieve the perfect design on the finished product.

5. Logo Safety AreaIt refers to an area to keep your logo which will be printed complete on the apparels, especially some neck labels which are near the stitching area.Click 'Gridlines' button and see some little squares, keep your logo at least one square height away from the black line, then, your logo is in the safety area.