CatalogunisexHoodies350GSM Unisex Heavyweight Fleece-lined Sweatshirt

350GSM Unisex Heavyweight Fleece-lined Sweatshirt

Print area

Front Side / Back Side / Neck Label

Process support

DTG print / DTF transfer / Heat transfer vinyl / UV printing

Sizes

SMLXL2XL

Colors

Ash Gray BlackGray GreenWhiteLight Beige GrayGray
21.361+
Start designingEstimated delivery turnaround 7–12 days

Description

  • 32 count fleece sweatshirt
  • Custom woven and dyed matching color ribbing
  • Ribbed cuffs and hem
  • Soft, structured, warm, and comfortable fabric

a. Self-developed 350g 32-yarn fleece sweatshirt, soft, structured, warm, and comfortable. b. Clean, relaxed loose silhouette, suitable for both inner and outer wear, with practical kangaroo pocket enhanced by two-needle stitching for added dimension. c. Custom-woven and dyed same-color ribbing, high-quality details, and reinforced two-needle stitching at the hem ribbing. d. King of cost-effectiveness, with a wide variety of colors.

Features
Snug collar for wind protection
Ribbed cuffs and hem
Oversized fit
Fabric
Fleece lining
Pre-shrunk
Reactive-dyed for longer-lasting color
32 count plain weave
Fabric weight: 350g/m²
Styles
Clean, relaxed loose silhouette
Practical and fun kangaroo pocket
Rich and varied colors

Care instructions

Hand washIron, medium temperatureLine dryDo not bleachDo not dry clean

Size Guide

This size guide shows product measurements taken when products are laid flat. Actual product measurements may vary by up to 1" (2.5cm).

A) Length

Place the end of the tape beside the collar at the top of the shirt (Highest Point Shoulder). Pull the tape measure to the bottom of the shirt.

B) Half Chest

Lay the garment down on a flat surface and measure it from left to right across the chest, about 2cm below the arms.

Imperial (in)SMLXL2XL
Chest22.0522.8323.6224.4125.2
Length26.3827.1727.9528.7429.53
Shoulder19.6920.4721.2622.0522.83
Sleeve length23.2323.8224.412525.59
Metric (cm)SMLXL2XL
Chest5658606264
Length6769717375
Shoulder5052545658
Sleeve length5960.56263.565

Print guide

1. Upload files in JPG and PNG formats with at least 150 dpiFor the best printing performance, make sure you upload images with at least 150 dpi. We recommend using PNG and SVG,because PNG's background is transparent, SVG's size is small and can be scaled without changing the quality of the image.

2. Make your design with the sRGB color profileThe color might be effected when converted to CMYK color profile which is used for printing. For the best accuracy, we suggest that you convert the print file to sRGB color profile in your design software.

3. Design and refer to the recommend size for each canvasWe now don't support the product templates for designing on your side. Make sure that print files have at least 150 dpi after eidting.

1. Safe print & Stitching areaSafe print area Keep all your designs are in the safe print area, in case your designs will be lost during production. Stitching areaThis area will be stitched during production. Please make sure your designs are not in this place.

2. Get all print area covered

3. Use full-bleed imagesAny space that isn't covered by designs will show the bare fabric, which may destroy the design.

4. Don't try to match designs across adjacent canvasEven though you match designs across adjacent canvas perfectly on mockup or our 3D model, it's not possible to achieve the perfect design on the finished product.

5. Logo Safety AreaIt refers to an area to keep your logo which will be printed complete on the apparels, especially some neck labels which are near the stitching area.Click 'Gridlines' button and see some little squares, keep your logo at least one square height away from the black line, then, your logo is in the safety area.